BUS 515 Midterm Latest
BUS 515 Midterm Latest
The concept of interchangeable parts was introduced by ___________________.
A company with a low customer contact that is capital intensive is called:
Entry-level positions for operations management graduates include all of the following except _________.
What are long-term decisions that set the direction for the entire organization called?
Which of the following is not true for business process reengineering?
What are the three primary types of technology?
Which type of technology has had the greatest impact on business?
What term describes the process of obtaining goods or services from an outside provider?
Suppose that a plant has a daily productivity of 200 parts per employee? What can we conclude?
Operational efficiency is:
What term is used to describe the integration of product design, process planning, and manufacturing using an integrated computer system?
Which product and service strategy is typically seen in repetitive operations?
Compared to intermittent operations, repetitive operations
What is CAD short for?
In product screening, issues such as “Will we need new facilities and equipment?” and “Can material for production be readily obtained?” are addressed by
Which of the following is least likely to be a benefit of implementing barcode scanners at retail store checkout registers?
_________________ crossdocking is the receiving and consolidating of inbound supplies to support just-in-time manufacturing.
Which of the following is a “buyer-side,” typically industry-specific solution?
Which B2C model does MyPoints.com utilize?
What term refers to attaining levels of productivity and competitiveness that are not possible through normal supplier relationships?
ISO 9000 is?
What quality control tool resembles a "fishbone?"
The Japanese term for continuous improvement is
The most important factor in the success or failure of TQM efforts is
ISO 14000 is for evaluating
BUS 515 Midterm Latest
The concept of interchangeable parts was introduced by ___________________.
A company with a low customer contact that is capital intensive is called:
Entry-level positions for operations management graduates include all of the following except _________.
What are long-term decisions that set the direction for the entire organization called?
Which of the following is not true for business process reengineering?
What are the three primary types of technology?
Which type of technology has had the greatest impact on business?
What term describes the process of obtaining goods or services from an outside provider?
Suppose that a plant has a daily productivity of 200 parts per employee? What can we conclude?
Operational efficiency is:
What term is used to describe the integration of product design, process planning, and manufacturing using an integrated computer system?
Which product and service strategy is typically seen in repetitive operations?
Compared to intermittent operations, repetitive operations
What is CAD short for?
In product screening, issues such as “Will we need new facilities and equipment?” and “Can material for production be readily obtained?” are addressed by
Which of the following is least likely to be a benefit of implementing barcode scanners at retail store checkout registers?
_________________ crossdocking is the receiving and consolidating of inbound supplies to support just-in-time manufacturing.
Which of the following is a “buyer-side,” typically industry-specific solution?
Which B2C model does MyPoints.com utilize?
What term refers to attaining levels of productivity and competitiveness that are not possible through normal supplier relationships?
ISO 9000 is?
What quality control tool resembles a "fishbone?"
The Japanese term for continuous improvement is
The most important factor in the success or failure of TQM efforts is
ISO 14000 is for evaluating
BUS 515 Midterm Latest
The concept of interchangeable parts was introduced by ___________________.
A company with a low customer contact that is capital intensive is called:
Entry-level positions for operations management graduates include all of the following except _________.
What are long-term decisions that set the direction for the entire organization called?
Which of the following is not true for business process reengineering?
What are the three primary types of technology?
Which type of technology has had the greatest impact on business?
What term describes the process of obtaining goods or services from an outside provider?
Suppose that a plant has a daily productivity of 200 parts per employee? What can we conclude?
Operational efficiency is:
What term is used to describe the integration of product design, process planning, and manufacturing using an integrated computer system?
Which product and service strategy is typically seen in repetitive operations?
Compared to intermittent operations, repetitive operations
What is CAD short for?
In product screening, issues such as “Will we need new facilities and equipment?” and “Can material for production be readily obtained?” are addressed by
Which of the following is least likely to be a benefit of implementing barcode scanners at retail store checkout registers?
_________________ crossdocking is the receiving and consolidating of inbound supplies to support just-in-time manufacturing.
Which of the following is a “buyer-side,” typically industry-specific solution?
Which B2C model does MyPoints.com utilize?
What term refers to attaining levels of productivity and competitiveness that are not possible through normal supplier relationships?
ISO 9000 is?
What quality control tool resembles a "fishbone?"
The Japanese term for continuous improvement is
The most important factor in the success or failure of TQM efforts is
ISO 14000 is for evaluating
BUS 515 Midterm LatestBUS 515 Midterm Latest
The concept of interchangeable parts was introduced by ___________________.
A company with a low customer contact that is capital intensive is called:
Entry-level positions for operations management graduates include all of the following except _________.
What are long-term decisions that set the direction for the entire organization called?
Which of the following is not true for business process reengineering?
What are the three primary types of technology?
Which type of technology has had the greatest impact on business?
What term describes the process of obtaining goods or services from an outside provider?
Suppose that a plant has a daily productivity of 200 parts per employee? What can we conclude?
Operational efficiency is:
What term is used to describe the integration of product design, process planning, and manufacturing using an integrated computer system?
Which product and service strategy is typically seen in repetitive operations?
Compared to intermittent operations, repetitive operations
What is CAD short for?
In product screening, issues such as “Will we need new facilities and equipment?” and “Can material for production be readily obtained?” are addressed by
Which of the following is least likely to be a benefit of implementing barcode scanners at retail store checkout registers?
_________________ crossdocking is the receiving and consolidating of inbound supplies to support just-in-time manufacturing.
Which of the following is a “buyer-side,” typically industry-specific solution?
Which B2C model does MyPoints.com utilize?
What term refers to attaining levels of productivity and competitiveness that are not possible through normal supplier relationships?
ISO 9000 is?
What quality control tool resembles a "fishbone?"
The Japanese term for continuous improvement is
The most important factor in the success or failure of TQM efforts is
ISO 14000 is for evaluating
BUS 515 Midterm Latest
The concept of interchangeable parts was introduced by ___________________.
A company with a low customer contact that is capital intensive is called:
Entry-level positions for operations management graduates include all of the following except _________.
What are long-term decisions that set the direction for the entire organization called?
Which of the following is not true for business process reengineering?
What are the three primary types of technology?
Which type of technology has had the greatest impact on business?
What term describes the process of obtaining goods or services from an outside provider?
Suppose that a plant has a daily productivity of 200 parts per employee? What can we conclude?
Operational efficiency is:
What term is used to describe the integration of product design, process planning, and manufacturing using an integrated computer system?
Which product and service strategy is typically seen in repetitive operations?
Compared to intermittent operations, repetitive operations
What is CAD short for?
In product screening, issues such as “Will we need new facilities and equipment?” and “Can material for production be readily obtained?” are addressed by
Which of the following is least likely to be a benefit of implementing barcode scanners at retail store checkout registers?
_________________ crossdocking is the receiving and consolidating of inbound supplies to support just-in-time manufacturing.
Which of the following is a “buyer-side,” typically industry-specific solution?
Which B2C model does MyPoints.com utilize?
What term refers to attaining levels of productivity and competitiveness that are not possible through normal supplier relationships?
ISO 9000 is?
What quality control tool resembles a "fishbone?"
The Japanese term for continuous improvement is
The most important factor in the success or failure of TQM efforts is
ISO 14000 is for evaluating
No comments:
Post a Comment
Note: only a member of this blog may post a comment.